Baldrick8 – DIY Build Kit (Cosmic 8-Series)

The Cosmic 8-Series DIY Build Kit is designed for builders who want the same professional-grade components used in our ready-to-run controllers, but prefer to handle the assembly themselves. Based on the trusted Baldrick8 pixel controller platform, this kit includes the exact enclosure, power supply, wiring, hardware, and accessories found in our prebuilt units — giving you a reliable, high-quality foundation for your custom controller build.

New to xLights? Please review our Before You Buy guide before purchasing.

Product Overview

This kit is ideal for hobbyists and installers who are comfortable with basic tools and low-voltage wiring. You receive the Baldrick8 board, UV-stabilized Boxco P-Series enclosure, Mean Well LRS-350-12 power supply, waterproof glands, pigtails, hardware, and PETG mounting plates — the same components used in our professionally assembled Cosmic 8-Series controller.

• Baldrick8 8-port pixel controller board
• Mean Well LRS-350-12 12 V DC / 350 W PSU
• UV-stabilized Boxco P-Series outdoor-rated enclosure
• 8 xConnect female pigtails for pixel outputs
• Waterproof Ethernet passthrough with RJ45 coupler
• 2 × 4-hole M25 IP68 cable glands for clean cable routing
• 1 × PG7 cable gland for the SJTW power cord
• SJTW outdoor-rated power cord
• PETG printed mount plates and brackets
• 10 AWG high-temp silicone wire and crimp ferrules
• Stainless-steel mounting hardware
• Cable ID clips and PSU terminal cover
• Drilling template for enclosure prep
• Bonus: 33 mm Cable Gland Wrench/Socket Tool Set

Key Features

Baldrick8 Pixel Control Platform

• 8 pixel outputs for props, mini-trees, and panels
• 750 pixels per port @ 40FPS
• Supports WS281x and RGBW pixels
• Compatible with xLights and FPP
• Supports DDP, Art-Net, E1.31, and sACN

Pro-Grade Components

• Mean Well LRS-350-12 350W 12 V power supply
• UV-stabilized Boxco P-Series enclosure with gasketed lid
• IP68-rated M25 multi-hole cable glands for pixel outputs
• PG7 cable gland for strain-relieved AC power entry
• Waterproof Ethernet passthrough with RJ45 coupler
• High-temp 10 AWG silicone wiring for safe power distribution
• PETG 3D-printed brackets for secure component mounting

DIY-Friendly Design

• Includes a drilling template for perfect gland alignment
• No need to source parts — everything required is included
• 3D-printed Cable ID clips keep pigtails labeled and organized
• Crimp ferrules and fork connectors ensure secure terminations

Premium Add-Ons Included

• 33 mm Cable Gland Wrench/Socket Tool Set — speeds up and simplifies installation of M25 cable glands
• 3D-printed PSU terminal cover — shields mains terminals from accidental contact
• Cable ID clips — improve organization and long-term serviceability

What’s Included

• 1 × Baldrick8 pixel controller board
• 1 × Boxco P-Series enclosure
• 1 × Mean Well LRS-350-12 350 W PSU
• 8 × xConnect female pixel pigtails
• 1 × Waterproof Ethernet passthrough + RJ45 coupler
• 2 × M25 IP68 4-hole cable glands
• 1 × PG7 gland for power cord
• 1 × SJTW outdoor-rated power cord
• PETG mount plates + brackets
• 10 AWG silicone power wires
• Ferrules + fork terminals
• Stainless hardware
• Cable ID clips
• PSU terminal cover
• Drilling template
• BONUS: 33 mm PETG Cable Gland Wrench/Socket Tool Set

What You Need to Provide

• Basic tools (drivers, cutters, hex key wrenches, etc.)
• Drill + bits for glands and passthrough
• Ferrule and fork terminal crimping tools
• Multimeter (recommended)

Skill Level & Safety

This kit requires comfort with low-voltage wiring and basic enclosure work. You will drill the enclosure, install components, and wire the power supply and controller. Follow all electrical codes and best practices when working with mains power.

If you’d prefer a fully assembled and tested controller, consider our ready-to-run Cosmic 8-Series prebuilt controller.

Recommended Accessories

• Wall Mount Bracket Kit (4-Pack) — Ideal for mounting your finished controller.
• Plastic End Cap (Male Plug) — Protect unused xConnect ports from moisture.
• 6–25mm Titanium Spiral Step Drill Bit — Perfect for drilling M25 holes in your enclosure for the included cable glands.

Why Choose Cosmic Controllers DIY Kits

Our DIY kits include the same curated parts we use in our professional builds — ensuring compatibility, durability, and clean installation. Skip the guesswork of sourcing hardware and spend more time creating your show. Build it your way with premium components you trust.