{"title":"Adapters","description":"","products":[{"product_id":"xconnect-power-injection-h-harness-3-2-3-tee-dual-use","title":"xConnect Power Injection H-Harness – 3-2-3 Tee (Dual-Use Power Balancing Pigtails)","description":"\u003cp\u003e\u003cem\u003eCompatible with standard 3-wire pixel lighting systems that use xConnect connectors.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003exConnect Power Injection H-Harness\u003c\/strong\u003e is a dual-purpose power solution designed for pixel installers who want cleaner wiring, better voltage balance, and fewer controller ports.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSee the wiring schematic in the product images for a visual pinout and wiring reference.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt by joining two \u003cstrong\u003e(3-2-3) xConnect power injection pigtails\u003c\/strong\u003e with \u003cstrong\u003e18 AWG flat cable\u003c\/strong\u003e, this harness can be used in multiple ways depending on your installation needs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUse as a connected H-harness\u003c\/strong\u003e for power balancing between pixel strings or props\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOr split in half\u003c\/strong\u003e to create \u003cstrong\u003etwo independent power injection pigtails\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOne product — multiple applications — giving you maximum flexibility during layout, install, or future expansion.\u003c\/p\u003e\n\n\u003cp\u003eThe two power injection tees are connected by a \u003cstrong\u003e2-core power jumper\u003c\/strong\u003e that measures \u003cstrong\u003e18 cm (7\")\u003c\/strong\u003e. This jumper carries \u003cstrong\u003eV+ and V− only\u003c\/strong\u003e (no data), allowing power to balance cleanly between branches while pixel data continues normally through the run.\u003c\/p\u003e\n\n\u003ch2\u003eDual-Purpose Power Injection \u0026amp; Power Balancing Harness\u003c\/h2\u003e\n\n\u003cp\u003eThis harness combines \u003cstrong\u003epower injection\u003c\/strong\u003e and \u003cstrong\u003epower balancing\u003c\/strong\u003e into a single, flexible solution. It allows power to be injected and shared exactly where it’s needed — without consuming additional controller ports.\u003c\/p\u003e\n\n\u003ch3\u003eUse Case 1: Dual Power Injection\u003c\/h3\u003e\n\n\u003cp\u003eUse both output legs as \u003cstrong\u003epower injection pigtails\u003c\/strong\u003e to deliver power to two separate locations along a pixel run. This is ideal for long runs, permanent outdoor installs (such as eaves), or large props where voltage drop is a concern.\u003c\/p\u003e\n\n\u003ch3\u003eUse Case 2: Power Balancing Through a Prop (H-Harness)\u003c\/h3\u003e\n\n\u003cp\u003eWhen installed inline, the harness functions as a \u003cstrong\u003epower balancing tee\u003c\/strong\u003e, allowing power to be shared evenly through a prop or between chained elements while maintaining a single data path.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe pixel data signal remains a normal pass-through on each branch\u003c\/strong\u003e, so the controller still sees the pixels as one continuous run.\u003c\/p\u003e\n\n\u003cp\u003eThis configuration is especially useful for:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMega tree strands powered from a single controller port\u003c\/li\u003e\n  \u003cli\u003eChained props where voltage consistency matters\u003c\/li\u003e\n  \u003cli\u003eLong pixel runs where balancing reduces flicker and color shift\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUse Case 3: End-of-Prop \/ End-of-Chain Power Injection\u003c\/h3\u003e\n\n\u003cp\u003eBy capping one of the male output connectors, the harness can also be used at the \u003cstrong\u003eend of a prop or pixel chain\u003c\/strong\u003e, allowing power to be injected and stabilized without continuing power or data beyond that point.\u003c\/p\u003e\n\n\u003cp\u003eThis is ideal for single large props or for reinforcing voltage at the end of long pixel runs.\u003c\/p\u003e\n\n\u003ch3\u003eOptional Waterproof End Cap Included\u003c\/h3\u003e\n\n\u003cp\u003eA \u003cstrong\u003efree waterproof xConnect end cap\u003c\/strong\u003e is included to safely protect the unused connector when operating in end-of-prop or end-of-chain configurations.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-Use Design\u003c\/strong\u003e – Use as an H-harness or split into two injection pigtails\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e(3-2-3) Power Injection Tee Layout\u003c\/strong\u003e – Purpose-built for pixel power distribution\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003exConnect Compatible\u003c\/strong\u003e – Works with standard xConnect systems\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e18 AWG Flat Cable\u003c\/strong\u003e – Supports power injection with minimal voltage loss\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e18 cm (7\") 2-Core Power Jumper\u003c\/strong\u003e – V+ and V− only for clean power balancing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIdeal for Mega Trees \u0026amp; Long Pixel Runs\u003c\/strong\u003e – Helps stabilize voltage across long pixel chains\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWaterproof Connections\u003c\/strong\u003e – Suitable for outdoor and permanent installs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCleaner Wiring\u003c\/strong\u003e – Fewer adapters, fewer ports, fewer failure points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat You’ll Receive\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOne (1) \u003cstrong\u003exConnect Power Injection H-Harness\u003c\/strong\u003e (3-2-3 configuration)\u003c\/li\u003e\n  \u003cli\u003eConfigured as a single connected harness (can be split if desired)\u003c\/li\u003e\n  \u003cli\u003eOne (1) \u003cstrong\u003ewaterproof xConnect end cap\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eIn Stock \u0026amp; Ships Next Business Day\u003c\/h2\u003e\n\n\u003cp\u003eThis item is \u003cstrong\u003ein stock\u003c\/strong\u003e and typically ships the \u003cstrong\u003enext business day\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Cosmic Controllers","offers":[{"title":"Default Title","offer_id":42561617526882,"sku":"CC-XC-HAR-323-PI","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/1972\/8482\/files\/xconnect-power-injection-h-harness-3-2-3-connected.jpg?v=1771008958"},{"product_id":"ray-wu-to-xconnect-pixel-adapter-female-ray-wu-male-xconnect","title":"Ray Wu to xConnect Pixel Adapter (Female Ray Wu → Male xConnect)","description":"\u003cp\u003eThis \u003cstrong\u003eRay Wu to xConnect pixel adapter\u003c\/strong\u003e lets pixel strings and extension cables with \u003cstrong\u003eRay Wu–style connectors (13.5mm)\u003c\/strong\u003e plug into the \u003cstrong\u003exConnect pixel output pigtails\u003c\/strong\u003e used on all Cosmic Controllers units. It’s a simple, reliable way to use existing Ray Wu wiring with an xConnect-based controller system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso called:\u003c\/strong\u003e Ray Wu to xConnect \u003cstrong\u003econverter\u003c\/strong\u003e, \u003cstrong\u003eadaptor\u003c\/strong\u003e, or \u003cstrong\u003eexchanger\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat This Adapter Does\u003c\/h2\u003e\n\u003cp\u003eConverts a \u003cstrong\u003eRay Wu–style female connector\u003c\/strong\u003e to a \u003cstrong\u003estandard xConnect male connector\u003c\/strong\u003e, allowing Ray Wu pixel strings or extensions to connect directly to xConnect controller outputs.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRay Wu Female to xConnect Male\u003c\/strong\u003e – Clean, direct connector conversion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-Play\u003c\/strong\u003e – No soldering or cable modification required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Connectors\u003c\/strong\u003e – Suitable for outdoor pixel installations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Adapter Design\u003c\/strong\u003e – Minimal added length or strain\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRay Wu–style pixel strings and extension cables (female side)\u003c\/li\u003e\n\u003cli\u003exConnect pixel output pigtails on Cosmic Controllers (male side)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat You’ll Receive\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOne (1) \u003cstrong\u003eRay Wu Female to xConnect Male\u003c\/strong\u003e adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Sold \u003cstrong\u003eindividually\u003c\/strong\u003e, so you can order exactly the quantity you need.\u003c\/p\u003e\n\u003ch2\u003eIn Stock \u0026amp; Ships Next Business Day\u003c\/h2\u003e\n\u003cp\u003eThis item is \u003cstrong\u003ein stock\u003c\/strong\u003e and typically ships the \u003cstrong\u003enext business day\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Cosmic Controllers","offers":[{"title":"Default Title","offer_id":42563452174434,"sku":"CC-ADPT-RW-F-XC-M","price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/1972\/8482\/files\/ray-wu-female-to-xconnect-male-adapter-angle.jpg?v=1771054751"}],"url":"https:\/\/www.cosmiccontrollers.com\/collections\/adapters.oembed","provider":"Cosmic Controllers","version":"1.0","type":"link"}